angle_extrude.py

bricks.py

This isn't a script you would use every day, but it's simple. It creates a brick pattern.

• Create a polygon and select it
• Run the script
Option popups: splitX: number of bricks desired along X splitY: number of bricks desired along Y (usually splitX times 2 for typical brick dimension) Note: Don't use odd numbers for the splitY

buzzGreeble.pl

Creates random greebles. So many things you can do with this script.

• Select polygons you want affected
• Run script

LP_BVHLoader

Loads motion capture .bvh files into modo.

How To Use: BVH Loader lives in "bvh" tab that is added to Commands toolbar found in Setup and Animate Tabs of default modo's layout.

Install Instructions: Drag entire BVHLoader folder into one of these locations:

• modo's User Configs
• modo's User Scripts
• modo content Kits folder

collapseLayers.pl

Copies the current scene's geometry into a single layer, and then deletes all the other layers.

collapseScenes.pl

Copies all the polygons in all the currently open scenes and pastes them in a new scene.

curves_fromEdges.pl

This script will convert any edge or poly-border selection into a curve. It works with verts as well

Shared from my Google Drive

deletehalf.pl

This script will look at all the polygons you have selected and delete whichever are below zero in whichever axis you picked (in the included popup form)

edgeSliceorAddVert.pl

There are times when you might want to add a point to an edge, and do a poly fan from that new vert. This script does it all in one go.

It also allows you to select edges and create a edge slice perpendicular to your selection.

• If you have multiple edges selected, it'll do the regular edge slice.
• If you have one edge slice selected, it'll add the vert and do the poly fan triple.

edgetrick.pl

This script allows you to create arcs in your geometry. By default it will make an arc that is the same height as 1/2 the distance between the two selected edges however you can also tell it how many divisions, and how high, in that order. (It also accepts other values as input)

edgeweight_95.pl

Sets the edge weight to 95%. If you assign it to a key, it's a time saving shortcut.

extrudePath.pl

This script will extrude a polygon set along an edge path.  It's really great for baseboards, cornices or trims. The tutorial video will explain best how to use it.

TUTORIAL VIDEO

flatten.pl

This script will flattens the selected geometry by its averaged normal.

geodesic.py

This script generates geodesic tetrahedra, octahedra, and icosahedra

hole_puncher.py

I love this script! Makes the best holes! And it's so neat!

• Select matching polys on either side of your mesh
• Run the script. Voila!

honeycomb45.LXM

Creates a honeycomb mesh

• Select polys
• Run the script
• Polys are copied and converted to a honeycomb pattern and then are placed into a new mesh

item_createAtVertices.pl

Places a point lights at each selected vertex

• Select verts
• Run the script
• Spotlights will be placed at each vertex

Note: the 8 point lights in the above image were all only set at 0.01 W/srm2 Radiant Intensity 

layerzMerge.pl

Combines all mesh layers selected into one.

lazySelect.pl

This script selects all the touching polygons that have the same material assigned.  It'sreally darn handy. Especially for level design because that's when you tend to have tonsof polygons touching each other that don't have the same material and you want to individually select material "groups" for UV applications.

makePolygon.pl

This script allows you to quickly make polygons from edges.  If you run the script with verts selected (in order), it will just run modo's make poly command.

• You can have any number of edges selected and it'll make a poly for each edgerow.
• You can't run it on touching edgeloops yet, because it'll make an illegal polygon right now.

mesh.LXM

Creates a diagonal mesh

• Select polys
• Run the script
• Polys are copied and converted to a diagonal pattern and are then placed into a new mesh layer

moveGeometryThere.pl

perfectCircle.pl

This script takes a selection of polys or edge loops and moves the vertices so they form a (flat) perfect circle.

• If you have MULTIPLE POLYGONS selected, it will only use the BORDER VERTS.
• If you have VERTS selected it will convert the selection to EDGES first. (so you have to use verts connected by edges like in the pic.)

print_hotkeys.pl

This script allows you to search through your cfg to find which hotkey(s) a specific command is mapped to. If you're like Seneca, and you have 2 million hotkeys, you'll tend to forget the rarely used ones every once in a while. This script makes it easier to find them.

quad_caps2.py

Converts cylinder end-caps to quads

quickbridge.pl

When bridging edges: -it deselects non border edges for you -it does the bridge then drops the tool, so it's only one click. -it also converts verts to edges for you so you can bridge in vert modeWhen bridging polygons: -it is the regular bridge tool.

quickMirror.pl

Similar to the regular Mirror tool, this one works based on the component selected

POLY SELECTION MODE : It'll run poly.mirror (axis) command, which will mirror the selected geometry across that chosen axis. You need to append the axis to the script, so if you want to mirror the geometry across the X axis, type "@quickMirror.pl x"

EDGE OR VERT SELECTION MODE : It'll mirror the geometry along the angle of the selected element(s)

quickPipe.pl

This script will create a pipe using your selected points. It uses the thickness and number of segments of the last created tube primitive (you can place it anywhere off to the side as a template). The script works with edges, so you can create multiple pipes in one click and don't have to pay attention to selection orders.

quick_window.py

Creates windows with frames with transparent glass. Very quick and clean. (I renamed this from window.py as there were several others with the same name)

• Select a poly (or multiple polys for multiple window-panes)
• Run the script (accepts number parameters e.g. @quick_window.py 3 - experiment a bit!)
• Voila! an awesome window

restOnGround.pl

If you have multiple meshes as a group and you select and run the script, they will move as a group relative to each other, rather than them all move to zero on the Y

• Select the mesh you want to rest on the ground (Y=0)
• Run script

selectHardEdges.pl

This script just selects the edges that have an edge weighting over 0.9.  (Seneca: Every once in a while, I need to select the hard edges, but I couldn't do it through the INFO+STATISTICS window, so I created a quick script for it). 

• If you have edges selected, it deselects the edges that have weighting below 0.9.
• If you have no edges selected, it selects the edges that have weighting above 0.9.

selectThatMesh.pl

This script will select all of the elements on the object under your mouse. It was created so you can quickly select a mesh from another layer without having to look through the item list or having to switch to item mode and back again. So what you do is just hold your mouse over an element and it'll put you in that element's layer and then select the rest of the elements for you, all in one click.

smartQuad-strip.pl

As you can see from the animated .gif just select verts in order and it'll fill in the missing quads. It can do a lot more too: 1) single polygons  2) strips of polygons and 3) meshes of polygons.

superTaut.py

So many different applications for this script. I suggest you refer to the video which explains a bunch of things you can achieve

superweld.py

This tool is for welding verts and EDGE ROWS!

• It welds (n) edge row(s) to the last selected edge row.
• If you want to weld edge loops, just deselect one edge from each row.
• When you're welding verts, it will remove all illegal polygons for you.

Texturize.pl

This tool assigns random textures to each connected group of polygons in the active mesh layer. To use just run the script, tell it how many different materials to create, and it will assign polygon mask materials. Good for things like bricks, tiles, floorboards, etc.

• Make your selection, either Item or Component
• Run the script @texturizer.pl
• Enter in the number of different materials you would like
• The script will then apply materials randomly to your selection, creating Material placeholders for you to edit in the Shader Tree
• Go to the Shader Tree and edit each individual material to suit your requirements.

T2Q.pl

Converts a triangulated mesh into quads

As the link on Takumi's site is broken, I am hosting it on my Google Drive here

unbevel.pl

This script will unbevel bevelled edges. You must have one extra edge selected on each side of the bevel, to indicate which edges are "flat" that you want to unbevel. You can unbevel more than one edgerow at a time - just make sure that the different edgerows aren't touching.

Window Maker

Creates windows with frames with transparent glass. Very quick and clean.

• Select a poly (or multiple polys for multiple window-panes)
• Run the script
• Voila! an awesome window